Anritsu MX269018A - Page 138

Chapter 3 Measurement
3-96
Stop Freq
■
Summary
Sets the maximum frequency for X-axis in the Frequency Domain
graph.
■
Setting range (X-AXIS is Linear)
60 to 50000 Hz
■
Options (X-AXIS is Log)
20 Hz Sets the maximum value of the horizontal scale to 20 Hz.
30 Hz Sets the maximum value of the horizontal scale to 30 Hz.
50 Hz Sets the maximum value of the horizontal scale to 50 Hz.
100 Hz Sets the maximum value of the horizontal scale to 100 Hz.
200 Hz Sets the maximum value of the horizontal scale to 200 Hz.
300 Hz Sets the maximum value of the horizontal scale to 300 Hz.
500 Hz Sets the maximum value of the horizontal scale to 500 Hz.
1 kHz Sets the maximum value of the horizontal scale to 1 kHz.
2 kHz Sets the maximum value of the horizontal scale to 2 kHz.
3 kHz Sets the maximum value of the horizontal scale to 3 kHz.
5 kHz Sets the maximum value of the horizontal scale to 5 kHz.
10 kHz Sets the maximum value of the horizontal scale to 10 kHz.
20 kHz Sets the maximum value of the horizontal scale to 20 kHz.
30 kHz Sets the maximum value of the horizontal scale to 30 kHz.
50 kHz Sets the maximum value of the horizontal scale to 50 kHz.
Top Level
■
Summary
Sets the vertical scale (Y-axis) in the Frequency Domain graph.
■
Setting range
(Bottom Level set value + 3) to 50 dBV
Bottom Level
■
Summary
Sets the vertical scale (Y-axis) bottom level in the Frequency
Domain graph.
■
Setting range
–200 to (Top Level set value – 3) dBV