Anritsu MX269018A - Page 76

Chapter 3 Measurement
3-34
Range2
■
Summary
Sets Range2 for meter. Enabled when Meter is set to On.
■
Setting range
When the unit is dB:
0.0 to 100.0 dB
When the unit is %:
0.0 to 10000.00%
Deflection View
■
Summary
Selects whether to display the deflection view on the meter.
Enabled when Meter is set to On.
■
Options
On Displays the deflection view on the meter.
Off Hides the deflection view on the meter.
Deflection Count
■
Summary
Sets the measurement count for setting deflection view on the
meter. Enabled when Deflection View is On and Meter is On.
■
Setting range
2 to 100
Deflection Judge
■
Summary
Selects whether to make a pass/fail judgment on the measurement
results by deflection view on the meter. Enabled when Deflection
View is On and Meter is On.
■
Options
On Makes a pass/fail judgment on the measurement
results by deflection view.
Off Does not make a pass/fail judgment on the
measurement results by deflection view.
Pass Range
■
Summary
Sets a pass range for deflection view on the meter. Enabled when
Deflection View is On and Meter is On.