3.4 TX Measurement Mode
3-39
3
Measurement
Start Frequency
■
Summary
Sets Start Frequency for distortion factor measurement.
■
Setting range
10 Hz to Manual Frequency set value for distortion factor
measurement
Stop Frequency
■
Summary
Sets Stop Frequency for distortion factor measurement.
■
Setting range
Manual Frequency set value for distortion factor measurement to
60000 Hz
Unit
■
Summary
Sets the unit for the distortion factor measurement results.
■
Options
dB Displays the distortion factor measurement
results in dB.
% Displays the distortion factor measurement
results in %.
To Next Page
Loading...
