Arris NVG599 - Page 147

147
The auto-config server is specified by URL and port number. The format for the ACS URL is as follows:
http://some_url.com:port_number
or
http://123.45.678.910:port_number
On units that support SSL, the format for the ACS URL can also be:
https://some_url.com:port_number
or
https://123.45.678.910:port_number
TR-064
DSL Forum TR-064 (“LAN Side CPE Configuration”) is an extension of UPnP (Universal Plug-and-Play). It defines
more services to locally manage the NVG599 device. While UPnP allows open access to configure the device's
features, TR-064 requires a password to execute any command that changes the device's configuration.
set management lanmgmt enable [ off | on ]
Turns TR-064 LAN side management services on or off. The default is off.
set management shell idle-timeout [ 1...120 ]
Specifies a timeout period of inactivity for Telnet access to the NVG599 device, after which a user must re-log
in to the NVG599. Default is 15 minutes for Telnet.
set management shell ssh-port [ 1 - 65534 ]
Specifies the port number for secure shell (SSH) communication with the NVG599. Defaults to port 0 (off).
set management shell telnet-port [ 1 - 65534 ]
Specifies the port number for Telnet (CLI) communication with the NVG599 device. Because port numbers in
the range 0-1024 are used by other protocols, you should use numbers in the range 1025-65534 when
assigning new port numbers to the NVG599 Telnet configuration interface. A setting of 0 (zero) will turn the
server off.
set management upnp enable [ off | on ]
Turns Universal Plug-and-Play (UPnP) on or off.
set management web http-port [ 1 - 65534 ]
Specifies the port number for HTTP (Web) communication with the NVG599 device. Because port numbers in
the range 0-1024 are used by other protocols, you should use numbers in the range 1025-65534 when
assigning new port numbers to the NVG599 Web configuration interface. A setting of 0 (zero) will turn the
server off.
set management web https-port [ 1 - 65534 ]
Sets the secure Web access port for secure management of the NVG599. Default is port 443.