173
System Commands
set system name name
Specifies the name of your NVG599 device. Each NVG599 is assigned a name as part of its factory initialization.
The default name for an NVG599 device consists of the word “ARRIS-7000/XXX” where “XXX” is the serial
number of the device; for example, ARRIS-7000/9437188. A system name can be 1 – 255 characters long. Once
you have assigned a name to your NVG599, you can enter that name in the address text field of your browser
to open a connection to your NVG599.
set system time-zone [ UTC | HST10 | AKST9AKDT | YST8 | PST8PDT |
MST7MDT | MST7 | CST6CDT | CST6 | EST5EDT | AST4ADT | NST3:30NDT ]
A time-zone setting of 0 is Coordinated Universal Time (UTC); options are -12 through 12 (+/- 1 hour
increments from UTC time).
set system auto-daylight-savings [ on | off ]
Time zones honoring Daylight Saving Time may be automatically designated.
set system firewall-log enable [ on | off ]
Turns firewall logging on or off. The firewall log tracks attempted violations of the firewall rules. Default is on.
set system firewall-log persist [ on | off ]
When set to on, causes the log information to be kept in flash memory. Default is off.
set system firewall-log file-size [ 4096... 65536 ]
Specifies a size for the firewall logs. The most recent entries are posted to the beginning of the log. When the
log becomes full, the oldest entries are dropped. The default is 16384.
set system firewall-log file-count [ 2... 8 ]
Specifies the number of possible log files. The default is 4.
set system fastpath software-enable [ on | off ]
Enables or disables the fastpath accelerator processor. Fastpath works on only TCP and UDP. Default is on.
set system fastpath hardware-enable [ off | on ]
Enables or disables the fastpath accelerator processor. Default is off.
set system fastpath mcast-mode 3
Sets the mode for multicast on the fastpath accelerator processor.
NOTE:
Some broadband cable-oriented service providers use the system name as an important identification and
support parameter. If your NVG599 device is part of this type of network, do not alter the system name
unless specifically instructed by your service provider.
To Next Page
