Administrator’s Handbook
96
Log Event Messages
The system generates the log messages described in the following tables for events related to administrative
access, system operation, DSL issues, packet access, or firewall issues.
Administration-Related Log Messages
1. administrative access attempted: This log message is generated whenever the user attempts to access the
router's management interface.
2. administrative access authenti-
cated and allowed:
This log message is generated whenever the user attempts to access the
router's management interface and is successfully authenticated and
allowed access to the management interface.
3. administrative access allowed: If for some reason, a customer does not want password protection for the
management interface, this log message is generated whenever any user
attempts to access the router's management interface and is allowed access
to the management interface.
4. administrative access denied -
invalid user name:
This log message is generated whenever the user tries to access the router's
management interface and authentication fails because of an incorrect
username.
5. administrative access denied -
invalid password:
This log message is generated whenever the user tries to access the router's
management interface and authentication fails because of an incorrect
password.
6. administrative access denied -
telnet access not allowed:
This log message is generated whenever the user tries to access the router's
Telnet management interface from a public interface and is not permitted
because remote management is disabled.
7. administrative access denied -
web access not allowed:
This log message is generated whenever the user tries to access the router's
HTTP management interface from a public interface and is not permitted
because remote management is disabled.
System Log Messages
1. Received NTP Date and Time: This log message is generated whenever NTP receives date and time from
the server.
2. EN: IP up: This log message is generated whenever Ethernet WAN comes up.
3. WAN: Ethernet WAN1 activated
at 100000 Kbps:
This log message is generated when the Ethernet WAN link is up.
4. Device Restarted: This log message is generated when the router has been restarted.
To Next Page
Loading...
