CHAPTER
ONE
FIRST STEPS WITH LEO
Setting up Artec Leo is easy and includes the following steps:
• Turn On
• Read License Agreement
• Connect to the Internet
• Activate Leo
• Apply Serial Number Sticker
1.1 Turn On
1. Take Leo out of the case and place it vertically on a at rigid surface.
2. Press the power button button near the screen (see Meet Leo, 3).
3. If the scanner hasn’t booted up, try plugging it to the power adapter.
Note: When you turn on the Leo scanner later after its activation, you may
be prompted to enter a password. This happens if storage encryption has been
previously enabled.
5
To Next Page
Loading...
