Artec LEO - Wireless Network Usage; Electrical Safety

Artec Leo
Complies with 21 CFR 1040.10 and 1040.11 except for conformance with IEC
60825-1 Ed. 3., as described in Laser Notice No. 56, dated May 8, 2019.
It is thereby conrmed that Leo is compliant with all the standard safety require-
ments and is safe for end users. Class 1 laser product means that the device is safe
regardless of the distance to the laser aperture.
Warning: Avoid looking into the scanner lens from the distance lower than
35 centimeters.
Leo has an additional protection system that halts the laser light if the distance
between the device and the object becomes lower than 10 centimeters.
Warning: Never attempt to disassemble the scanner. The laser source inside
the device can cause eye injury if the device is operated in a disassembled
or modied state. Only authorized Artec Europe Sarl personnel can perform
service operations.
7.1.2 Wireless Network Usage
Scanner uses radio signals to connect to Wi-Fi networks. You must observe reg-
ulations that forbid the use of electronic device in some facilities. Turn o Wi-Fi
in the scanner settings to this end.
7.1.3 Electrical Safety
To avoid electrical shock, use Leo in dry environment (see Operating Temperature
and Humidity for details).
Warning: Never open scanner housing or insert foreign object into its open-
ings.
92 Chapter 7. Safety and Handling Information