Artec LEO - Legal Warranty and Hidden Defects; Manufacturers Address; Compliance

Artec Leo
All the maintenance and repair procedures are only carried out by the manufac-
turer.
7.5 LegalWarrantyand Hidden Defects
1. Artec shall be held liable for any lack of conformity and hidden defects
which exist upon 3D scanner LEO (the “Product”) delivery, even unknown
to Artec.
2. The legalwarrantyallows the Client to report to Artec any defaults of con-
formity of the Product resulting from the packaging or the Product’s instal-
lation if such installation formed part of the Contract or took place under
Artec’s responsibility. In case of lack of conformity, the Client has the choice
between (i) requesting to remedy the lack of conformity, unless this is im-
possible or disproportionate, by the repair or replacement of the Product, or
(ii) returning the Product and being reimbursed, or keeping the Product and
having part of the price reimbursed. The Client cannot request the return
of the Product or the reimbursement of part of the price if Artec replaces or
repairs the Product. In order to invoke the legalwarranty, the Client must,
by any means, inform Artec of the default in conformity within two years
from the time of delivery of the Product.
3. This legalwarrantyis without prejudice to the Client’s right to prevail of
any other action permitted by law, such as thewarrantyfor hidden defects.
7.6 Manufacturer’s Address
Artec Europe Sarl
20 rue des Peupliers
L-2328 Luxembourg
7.7 Compliance
Leo is compliant with the regulations stated in this section.
7.5. LegalWarrantyand Hidden Defects 99