CHAPTER
THREE
PROJECTS AND SCANS
Once Leo has booted up, the Project screen appears. Scanner allows you to view
projects and scans on its display (Open Project), continue scanning to the existing
scan, add new scans to the project and copy them to an SD memory card.
By default, the most recent project is available on the left of the screen. To invert
the order, tap the Date link in the top right corner.
3.1 Project Structure
Any Leo project includes at least one scan. If the scan was paused or interrupted
and then resumed, an addition appears in the History section of the Scanning
screen. You can undo each addition sequentially by navigating the History back-
wards.
3.2 Open Project
To open a project,
1. Access the Projects screen.
2. Scroll the list horizontally while consulting the preview images.
3. Then tap the required project. Leo will display the project structure where
you can either add a new scan or continue recording to the existing one.
31
To Next Page
Loading...
