Artec LEO - Read License Agreement; Connect to the Internet; Wi-Fi; Wired Connection

Artec Leo
1.2 Read License Agreement
Once the scanner is turned on, it will show the greeting screen with the license
agreement. Read it carefully and, if you agree to the terms, Accept it.
1.3 Connect to the Internet
The initial Leo activation requires an Internet connection; afterwards, you can use
the scanner oine.
1.3.1 Wi-Fi
To connect to a Wi-Fi network,
1. Wait for the required network to appear in the list.
2. Tap the network that you intend to join.
3. Enter the password (key) for this network and tap Connect. Once you are
connected to a Wi-Fi network, icon will appear in the top status bar.
1.3.2 Wired Connection
To create a wired connection, plug the Ethernet cable into the scanner as the gure
depicts. If the network is congured as DHCP, the connection will be established
automatically and icon will appear in the top status bar.
1.2. Read License Agreement 7