Artec Leo
5. Tap Copy to SD. Wait for a progress ring to go o.
6. If the SD card is full before copying all items, insert a new card into Leo.
Leo will continue copying the remaining items to the new card.
3.5.1 Copy Scan
To copy scans from the project, before step 3 in the procedure, open the required
project. Then continue the procedure.
3.6 Remove Project or Scan
To delete one or several projects,
1. Access the Projects screen.
2. Tap the Select button.
3. Select the items that you want to remove.
4. Tap Move to bin. Artec Leo will move the items to the Bin.
3.6.1 Remove Scan
To delete scans from the project, before step No. 2 in the procedure, open the
required project.
3.7 Access Deleted Projects and Scans
To access the deleted scans and projects:
1. Open the Projects screen.
2. Tap the Bin button. Leo will open the Trash bin showing all deleted scans.
Note: Any deleted project will split into scans once it appears in the Trash bin.
Leo lists all the deleted scans by time created. Scans are named using the Project
2/1 pattern meaning that it is the Scan 1 from the Project 2.
To select scans in the Trash bin, tap them. To select all items at once, use the
Select all button.
36 Chapter 3. Projects and Scans
To Next Page
Loading...
