Artec LEO - Capture Screenshots; Trusted Accounts

Artec Leo
To restore scans To delete scans
Tap Restore. The scans will then ap-
pear in their respective projects.
Tap Delete. The scans will be perma-
nently deleted from Leo.
3.8 Capture Screenshots
You can capture screenshots in Leo and export it to a microSD card. To take a
screenshot of the Leo screen:
1. Simultaneously press and release the power button and the start/stop button
3/29/23, 5:41 PM
red_but.svg
file:///C:/Users/admin/ld/_build/latex/red_but.svg
1/1
.
2. Insert a microSD card into Leo.
3. Select Settings → Scanner → Move screenshots to SD card.
Note: Screenshots are saved in Leo’s internal memory and can’t be viewed on
Leo. They will be stored internally until you log out of Leo or move them to the
microSD card.
3.9 Trusted Accounts
Only specic users can open projects from Leo in Artec Studio:
• Scanner owner
• Users from the Trusted accounts list.
To grant the specic user an access to your Leo projects, follow the steps:
1. Open my.artec3d.
2. Access the Scanners section.
3. Scroll to the Trusted account title.
4. Click the add link.
5. Enter the email address of this my.artec3d user.
6. Access Projects on Leo.
3.8. Capture Screenshots 37