Artec LEO - Power Supply and Cables

Artec Leo
7.1.3.1 Power Supply and Cables
• Use only power adapters and cables intended for Leo scanner and supplied
by Artec Europe Sarl.
Caution: Using the DC cables and power adapters intended
for Artec Eva or other scanners may lead to malfunction of Leo
scanner.
• Before you plug the power cord into a power outlet, check the connection in
the locations:
– Between Leo and the DC cable
– Between the power supply and the power cord
• Protect the cables from being trodden on or being squashed.
• Protect the openings from foreign objects or dripping liquids.
• Place power supply unit on a stable surface. A drop or fall could cause
damage.
• Always check all the cables for damages.
7.1. Safety Information 93