Artec Leo
Table 1 – continued from previous page
6. While still holding the bracket
in the lowest position, insert a
newly charged battery into the
compartment.
file:///C:/Users/admin/ld/_build/latex/bat_compart.svg
7. Close the battery lid.
6.4 Calibration Board
All Artec Leo scanners are delivered pre-calibrated and issued with a calibration
certicate (2022 onwards). It is however, possible to recalibrate Leo. See Calibra-
tion for detailed information.
The Leo Calibration board is especially designed for recalibrating Leo, and enables
you to calibrate Leo in just a few steps.
88 Chapter 6. Other Devices and Accessories
To Next Page
Loading...
