Artec Leo
Caution: Never use excessive force when inserting a microSD card into the
slot. If you feel resistance, please double check that you are pushing the card
using the correct side (see the gure above).
Important: The warranty doesn’t cover slots damaged in this way.
6.1.2 Export to Multiple Cards
Artec Leo enables you to export projects to multiple microSD cards. This is
particularly time saving when you want to transfer multiple or large scans, and
you do not have a microSD card with that much storage capacity. After inserting
one card, you can select all the items at once and tap Copy to SD. When the
microSD card is full, Leo prompts you to remove the card and insert a new one,
and automatically continues copying the remaining items to the new card.
6.1.3 Encrypt Projects to Export
To ensure security of HD scan data, Leo enables you to encrypt your projects
before exporting them to the external SD. To do so, turn on the Encrypt projects
(AS16+) feature in Settings. After selecting projects, when you tap Copy to SD,
Leo converts those projects into a new .leo format before exporting them to SD.
Note: The encrypted projects in .leo format are only compatible with Artec
Studio version 16 and above.
6.1.4 Remove Card
To remove a microSD card:
1. Slightly push a microSD card until you hear a click. The card will pop up
emerging half of its length.
2. Pull the card out of the slot.
6.1. MicroSD Memory Card 79
To Next Page
Loading...
