V9.7 01/05/20 UD0011 Page 32 of 177
This Document is uncontrolled when printed unless over stamped “CONTROLLED DOCUMENT"
NOTE: If you are using RRMS, there is no option to allocate Reports to users; therefore the Reports column
will not be displayed on the User Admin page as can be seen in the example below:
9. At this point, you can add more users by selecting the Add button and repeating steps 4-8. If you wish to
continue without adding any more users please carry on to the next step.
10. When you have finished adding users select Exit. You will be taken back to the Admin screen, from there select
Exit again to return to the login screen.
To Next Page
Loading...
