Atrust T180L - Page 158

Conguring Client Settings
Conguring Service Access Settings
148
4. On General sub-tab, leave the connection type as Web Logon as default, and then type in the desired
session name and the IP address / URL / FQDN of the server through which Citrix services are accessible.
NOTE
• For newer versions of XenDesktop and XenApp, you may need to further specify
the sub-path of the server. Refer to the following table for details:
Citrix Product
Component to
Connect
Connection Address
XenApp 6.5 or
earlier
Web Interface IP / URL / FQDN
XenDesktop 5.6
or earlier
Web Interface IP / URL / FQDN
XenApp and
XenDesktop 7.5
StoreFront
IP / URL / FQDN plus sub-path
For example —
FQDN: X75.CTX.poc
Sub-path: /Citrix/StoreWeb (default)
Connection Address:
X75.CTX.poc/Citrix/StoreWeb
• FQDN is the acronym of Fully Qualied Domain Name.
5. Click Save to add this ICA connection entry. The access shortcuts are automatically created on the local
desktop and START menu.
NOTE
• Depending on your plan of service delivery and the conguration of your server(s),
you may need to congure other advanced ICA connection settings for service
access. For more information on other available settings, please refer to section
“4.6.11 Conguring Advanced ICA Connection Settings” on page 169.