Atrust T180L - Establishing and Stopping a Wireless Connection

Conguring Client Settings
Conguring Network Settings
108
4.5.12 Establishing and Stopping a Wireless Connection
NOTE
• Before you can access available wireless networks, you need to install an external
and USB-based wireless network adapter for your t180L. Ensure that you have set up
the required wireless network adapter.
• Your t180L package may not include a wireless network adapter (optional). Please
contact your dealer for compatible adapters if needed. It’s recommended to check
with your dealer rst if you plan to purchase one by yourself.
Establishing a Wireless Network Connection
To establish a wireless network connection for your t180L/t180LB thin client, please do the following:
1. On Atrust Client Setup, click Network > Wireless to open the Wireless Network list.
NOTE
• Your t180L/t180LB will perform network discovery once and specify all available
wireless networks. To refresh, click Scan on the top of the Wireless Network list.
2. Click to check the desired wireless network. The Connect button then appears on the top of the
Wireless Network list.