Atrust T180L - Page 182

Conguring Client Settings
Conguring Service Access Settings
172
Options Sub-tab
Device Mapping
Item Description
Mapping Local USB Storage
Click the drop-down menu to enable/disable the mapping of the local USB drive(s)
and to select access type in a Citrix ICA session. Three options are available: No, Read
Only, and Read Write. If Read Only or Read Write is selected, the locally attached USB
drive(s) will become available in launched Citrix ICA sessions.
NOTE: You need to enable local USB storage drive(s) as well. See section “4.4.3
Conguring Settings for USB Storage Devices” on page 82 for details.
Mapping Local Serial Ports
Click the drop-down menu to enable/disable the mapping of the local serial device(s)
in a Citrix ICA session. If Ye s is selected, the locally attached serial device(s) will become
available in launched Citrix ICA sessions.
NOTE: This setting item is not applicable to your t180L/t180LB. However, if you
use a serial-based barcode scanner, and attach it to your t180L/t180LB
with a serial-to-USB adapter, you need to enable this setting in order to
use the local barcode scanner in a virtual desktop.
Mapping Local Printers
Click the drop-down menu to enable/disable the mapping of the local printer(s) in a
Citrix ICA session. If Ye s is selected, the locally attached printer(s) will become available
in launched Citrix ICA sessions.
NOTE: To enable locally attached printer(s), please refer to section “4.4.7
Adding a Local Printer” on page 86 for detailed instructions.
Connection Settings
Item Description
Rendering Type
Click the drop-down menu to select resources rendering on the endpoint or the
server. Two options are available: Server Rendering and Client Rendering.
NOTE: The Client Rendering option may not be available on your system.
HDX RealTime WebCam
This item is available only when Client Rendering is selected.
When Yes is selected, a locally attached webcam can be used in an ICA session.
Use H264 Compression
Check to enable H.264 compression support on the client, allowing session data
are sent from the server side using H.264 format encoding.
USB Redirection Settings
Item Description
USB Storage
Please refer to “Advanced Quick Connection Settings for Citrix ICA Sessions” on
page 57 for detailed instructions on these similar settings.
Printers
Redirect Connected
USB Devices
Plugged USB Devices
Redirection Rules