Atrust T180L - Page 189

Conguring Client Settings
Conguring Service Access Settings
179
Server Address
Type in the IP address / URL / FQDN of the server through which virtual desktops
are accessible.
Username Type in the user/account name used for authentication.
Password Type in the password of the user account used for authentication.
Domain Type in the domain of the server.
Desktop Group / Application
Type in the name of the desktop group or use the Search icon
in front of the
eld to discover available desktop groups.
Common Settings
Item Description
Autostart When Startup
Select whether to open a Citrix ICA session automatically or not when your
t180L/t180LB is started up (Autostart mode).
NOTE: There are three similar but different modes for your t180L/t180LB and
only one mode will take effect if all are enabled. Three modes and the
order of priority are listed as follows:
No. Mode Description
1 Appliance
The client will start up directly with the desired
Citrix ICA session and perform the congured
action after exiting the session.
Available actions include:
• Re-launching a new session
• Restarting the thin client
• Turning off the thin client
2 Autostart
The client will start up directly with the desired
Citrix ICA session and perform the congured
action after exiting the session.
Available actions include:
• Returning to the local desktop
• Re-launching a new session
• Restarting the thin client
• Turning off the thin client
3 Quick Connection
The default. The client will enter Atrust Quick
Connection screen after system startup.
NOTE: To use the Autostart mode, ensure that the Appliance mode is disabled.