Atrust T180L - Page 199

Conguring Client Settings
Conguring Service Access Settings
189
Server Address Type in the IP address / URL / FQDN of a XenApp server.
Username Type in the user/account name used for authentication.
Password Type in the password of the user account used for authentication.
Domain Type in the domain of the server.
Application Name
Type in the application name or use the Search icon
in front of the eld to
discover available applications.
Common Settings
Item Description
Autostart When Startup
Select whether to open a Citrix ICA session automatically or not when your
t180L/t180LB is started up (Autostart mode).
NOTE: There are three similar but different modes for your t180L/t180LB and
only one mode will take effect if all are enabled. Three modes and the
order of priority are listed as follows:
No. Mode Description
1 Appliance
The client will start up directly with the desired
Citrix ICA session and perform the congured
action after exiting the session.
Available actions include:
• Re-launching a new session
• Restarting the thin client
• Turning off the thin client
2 Autostart
The client will start up directly with the desired
Citrix ICA session and perform the congured
action after exiting the session.
Available actions include:
• Returning to the local desktop
• Re-launching a new session
• Restarting the thin client
• Turning off the thin client
3 Quick Connection
The default. The client will enter Atrust Quick
Connection screen after system startup.
NOTE: To use the Autostart mode, ensure that the Appliance mode is disabled.