Atrust T180L - Page 201

Conguring Client Settings
Conguring Service Access Settings
191
Mapping Local Printers
Click the drop-down menu to enable/disable the mapping of the local printer(s) in a
Citrix ICA session. If Ye s is selected, the locally attached printer(s) will become available
in launched Citrix ICA sessions.
NOTE: To enable locally attached printer(s), please refer to section “4.4.7
Adding a Local Printer” on page 86 for detailed instructions.
Connection Settings
Item Description
Rendering Type
Click the drop-down menu to select resources rendering on the endpoint or the
server. Two options are available: Server Rendering and Client Rendering.
NOTE: The Client Rendering option may not be available on your system.
HDX RealTime WebCam
This item is available only when Client Rendering is selected.
When Yes is selected, a locally attached webcam can be used in an ICA session.
Use H264 Compression
Check to enable H.264 compression support on the client, allowing session data
are sent from the server side using H.264 format encoding.
Network Protocol
Click the drop-down menu to select the protocol(s) used for connection. Three
options are available: TCP/IP, TCP/IP + HTTP server location, and
SSL/TLS + HTTPS server location.
Enable Automatic Reconnect
Check/Uncheck to enable/disable automatic reconnecting after an ICA session
was interrupted.
Number of Retries Click the drop-down menu to select the number of retries, ranging from 1 to 10.
Delay between Retries
Click the drop-down menu to select the delay time between retries, ranging from
5 to 60 seconds.
Enable Audio Check/Uncheck to enable/disable sound in an ICA session.