Mode
The Screensaver Mode screen allows you to enable or disable the screensaver/lock.
The following figure shows the Mode setting screen.
Figure 57: Screensaver Mode setting screen
Choose one of the following screensaver configuration options:
1. Disable — to the disable the screensaver.
2. Enable (no password) — to enable the screensaver with password-free mode.
3. Enable (with password) — to enable the screensaver with password mode.
Press Select to select the currently highlighted setting.
Press Back to exit the Screensaver Mode menu.
Note:
Some options may not appear, depending on configuration.
Disable:
Disabling the Screensaver displays a message confirming your selection.
The following figure displays the Screensaver Disabled message screen.
Figure 58: Screensaver Disabled message
Enable (no password):
Enabling the screensaver in no password mode displays a message confirming your selection.
The following figure displays the Screensaver Enabled (no password) message screen.
Screensaver/screen lock
August 2017 Avaya 1140E IP Deskphone with SIP Software User Guide 233
Comments on this document? infodev@avaya.com
To Next Page
Loading...
