What does 'VOUD configured on TN' mean on Avaya 1140E?
If you see 'VOUD configured on TN' on your Avaya IP Phone, it means that the remote IP Deskphone does not have VOUA Class of Service. Notify your system administrator to resolve this.
General| Speakerphone | Full-duplex speakerphone |
|---|---|
| Weight | 2.2 lbs |
| Display | High-resolution, backlit, graphical display |
| Connectivity | 10/100 Mbps Ethernet |
| Power | PoE (802.3af) or external power adapter |
| Protocol | SIP, H.323 |
| Expansion | No |
| Lines | Up to 6 lines |
| Headset Port | Yes |
| Supported Codecs | G.711, G.729 |
Details the physical controls and keys on the Avaya 1140E IP Deskphone, including fixed and soft keys.
Explains the function and usage of the four context-sensitive soft keys located below the LCD screen.
Explains the security measures for the IP Deskphone, including user ID and password requirements.
Details the procedure for logging on to the IP Deskphone using a logon ID and password.
Provides steps on how to log off the IP Deskphone from the Services menu.
Details how to make an emergency call from any screen without logging on.
Provides cautions and preparation steps before installing the IP Deskphone.
Guides the user through connecting the physical components of the IP Deskphone.
Provides instructions for connecting the IP Deskphone to the LAN using an Ethernet cable.
Provides methods for making calls by going off-hook first, then dialing.
Explains how to make calls by dialing the number or SIP address before going off-hook.
Explains the four methods to answer an incoming call on the IP Deskphone.
Provides steps for composing and sending an Instant Message on the IP Deskphone.
Explains how to initiate a new call while already on an active call.
Explains how to place an active call on hold using the Hold feature.
Guides on how to retrieve a call that has been placed on hold.
Provides steps on how to transfer a call to another telephone number or SIP address.
Describes the purpose and configuration of programmable feature keys on the IP Deskphone.
Guides on how to access the screen for programming feature keys on the IP Deskphone.
Explains how to use Call Forward to direct incoming calls to an alternate destination.
Explains how to use Do Not Disturb to automatically block all incoming calls.
Guides through the initial login process, including username, password, and SIP domain.
Explains how to place calls using any of the registered user accounts on the IP Deskphone.
Describes how incoming calls are displayed and answered on the IP Deskphone.
Describes the use and limitations of programmable feature keys associated with accounts.
Explains how to use Do Not Disturb to block all incoming calls for an account or all accounts.
Details how to forward calls to an alternate destination for specific or all accounts.
Explains how to log out and re-register to the server by resetting the IP Deskphone.
Guides on making outgoing calls with MLPP, specifying precedence levels.
Explains the preemption process when higher precedence calls are received.
To Next Page
