Parameter name Default
value
Description
AUTHCTRLSTAT
админ
0 Specifies if the enhanced debugging
capabilities can be activated from
the SSH server by the Avaya
technicians only.
Value operation:
• 0: Enhanced debugging
capabilities are disabled.
• 1: Enhanced debugging
capabilities are enabled.
The parameter must be set to 1 only
for the debugging period by Avaya
technicians. Set the parameter back
to 0 when the debugging period
completes.
AUTO_SELECT_ANY_IDLE_APPR 0 Specifies that any idle call
appearance (primary or bridged) can
be automatically selected. This
parameter works along with the
parameter
CONF_TRANS_ON_PRIMARY_AP
PR.
Value operation:
• 0: Disabled. Both parameters
AUTO_SELECT_ANY_IDLE_APP
R and
AUTO_SELECT_ANY_IDLE_APP
R are set to 0.
• 1: Enabled. The parameter
CONF_TRANS_ON_PRIMARY_A
PPR is set to 0.
AUTO_UNMUTE 0 Specifies whether the call is not in a
muted state when the transducer is
changed. This feature is applied on
all types of calls.
Value operation:
• 0: Disabled. Call is in mute state.
• 1: Enabled. Call is not in mute
state.
Table continues…
January 2020 Installing and Administering Avaya 9601/9608/9611G/9621G/9641G/9641GS IP
Deskphones SIP 161
Comments on this document? infodev@avaya.com
To Next Page
Loading...
