Parameter name Default
value
Description
DIRSECURE 1 Specifies whether to use TLS or
TCP for LDAP. To authenticate the
server, startTLS is used. ldaps:// is
not supported. You need to
configure startTLS for the secure
LDAP connection.
Value operation:
• 0: Use TCP
• 1: Use TLS
For example,
SET DIRSECURE 1
Note:
Avaya J129 IP Phone does not
support this parameter.
Table continues…
List of configuration parameters
January 2020 Installing and Administering Avaya 9601/9608/9611G/9621G/9641G/9641GS IP
Deskphones SIP 176
Comments on this document? infodev@avaya.com
To Next Page
Loading...
