Avaya 9600 Series - Page 177

Parameter name Default
value
Description
DIRSHOW_FIELDS "cn,sn,telep
honeNumbe
r,Mail"
Specifies LDAP detail show fields.
The phone returns the attributes,
specified in this parameter, for each
match found for a search query.
You can use this parameter to map
the specified LDAP keywords. This
mapping defines the way the phone
displays show fields.
For example,
SET DIRSHOW_FIELDS
"dn=Distinguished Name, rank,
gn=First
Name,office=Office,middle
initials=Middle
Initial,Display Name=Full
Name,sn=Last Name,job
title=Job,cn=Common
Name,o=Office,c=Country,depart
ment=Department,street=Street,
mail=Mail
Box,l,telephoneNumber=PhoneNum
ber,st,mobile=Mobile,postalCod
e=Postal
code,facsimileTelephoneNumber=
Fax,DoD SIP URI=Number"
In this example, the format is as
follows:
SET DIRSHOW_FIELDS "[LDAP
Attributes]=[Field Names],
[LDAP Attribute 1]=[Field
Name1]"
Note:
Avaya J129 IP Phone does not
support this parameter.
Table continues…
January 2020 Installing and Administering Avaya 9601/9608/9611G/9621G/9641G/9641GS IP
Deskphones SIP 177
Comments on this document? infodev@avaya.com