Parameter name Default
value
Description
ENABLE_SHOW_EMERG_SK_UNREG 2 Specifies whether an Emergency
softkey, with or without a
confirmation screen, is displayed
when the phone is not registered.
All emergency numbers will always
be supported.
Value operation:
• 0: Emergency softkey is not
displayed.
• 1: Emergency softkey is
displayed without a confirmation
screen.
• 2: Emergency softkey is
displayed with a confirmation
screen.
Note:
The parameter is set to 0 for IP
Office environment.
ENABLE_SIP_USER_ID 0 Specifies the display of the user ID
input field on the Login Screen.
Value operation:
• 0: Disabled
• 1: Enabled
ENABLE_STRICT_USER_VALIDATION 0 Specifies that the validation is done
for the To header and Request-URI
against AOR and Contact header
during phone registration.
Value operation:
• 0: No validation.
• 1: Validates the phone registration.
Table continues…
List of configuration parameters
January 2020 Installing and Administering Avaya 9601/9608/9611G/9621G/9641G/9641GS IP
Deskphones SIP 192
Comments on this document? infodev@avaya.com
To Next Page
Loading...
