Avaya 9600 Series - Page 193

Parameter name Default
value
Description
ENCRYPT_SRTCP 0 Specifies whether RTCP packets
are encrypted or not. SRTCP is only
used if SRTP is enabled using
MEDIAENCRYTIONRTCP.
ENCRYPT_SRTCP parameter
controls RTCP encryption for RTCP
packets exchanged between peers.
RTCP packets sent to Voice
Monitoring Tools are always sent
unencrypted.
Value operation:
• 0: SRTCP is disabled.
• 1: SRTCP is enabled.
ENFORCE_SIPS_URI 1 Specifies if a SIPS URI must be
used for SRTP.
Value operation:
• 0: Not enforced
• 1: Enforced
ENHDIALSTAT 1 Specifies if the algorithm defined by
the parameter is used during certain
dialing behaviors.
Value operation:
• 0: Disables algorithm.
• 1: Enables algorithm, but not for
contacts.
• 2: Enables algorithm including
contacts.
Note:
The parameter is set to 0 for IP
Office environment.
ENTRYNAME 0 Specifies if the calling party name,
or the VDN or the skill name must
be used in History entries.
Value operation:
• 0: Calling Party Name is used.
• 1: VDN or the skill name is used.
Table continues…
January 2020 Installing and Administering Avaya 9601/9608/9611G/9621G/9641G/9641GS IP
Deskphones SIP 193
Comments on this document? infodev@avaya.com