Parameter name Default
value
Description
L2Q 0 Specifies if layer 2 frames generated
by the telephone have IEEE 802.1Q
VLAN tags.
Value operation:
• 0: Auto. VLAN tagging is turned
on when the network can support
VLAN tagging and L2QVLAN is
non zero.
• 1: On. VLAN tagging is turned on
when the network can support
VLAN tagging. The IP phone
sends tagged frames with VLAN =
L2QVLAN, even if L2QVLAN is
set to 0.
• 2: Off. VLAN functionality is
disabled.
Note:
This parameter can also be set
through:
• Local admin procedure
• A name equal to value pair in
DHCPACK message
• SET command in a settings
file
• DHCP option 43
• LLDP
L2QAUD 6 Specifies the layer 2 priority value
for audio frames generated by the
telephone.
Valid values are 0 through 7.
Note:
This parameter can also be set
through:
• SET command in a settings
file
• LLDP. Setting this parameter
though LLDP overwrites any
values in the settings file.
Table continues…
List of configuration parameters
January 2020 Installing and Administering Avaya 9601/9608/9611G/9621G/9641G/9641GS IP
Deskphones SIP 204
Comments on this document? infodev@avaya.com
To Next Page
Loading...
