Parameter name Default
value
Description
L2QSIG 6 Specifies the layer 2 priority value
for signaling frames generated by
the phone.
Valid values are 0 through 7.
Note:
This parameter can also be set
through:
• SET command in a settings
file
• LLDP
• AADS
Setting this parameter through
LLDP or AADS overwrites
values in the settings file.
L2QVLAN 0 Specifies the voice VLAN ID to be
used by IP phones.
Valid values are 0 through 4094.
Note:
This parameter can also be set
through:
• Local admin procedure
• A name equal to value pair in
DHCPACK message
• SET command in a settings
file
• DHCP option 43
• LLDP
LANGUAGES Null Specifies the language files that
must be installed or downloaded to
the phone.
Filenames can be full URL, relative
pathname, or filename.
Valid values can contain 0 to 1096
ASCII characters, including
commas. Filenames must end
in .xml
Table continues…
January 2020 Installing and Administering Avaya 9601/9608/9611G/9621G/9641G/9641GS IP
Deskphones SIP 205
Comments on this document? infodev@avaya.com
To Next Page
Loading...
