Parameter name Default
value
Description
LLDP_ENABLED 2 Specifies whether LLDP is enabled.
Value operation:
• 0: Disabled
• 1: Enabled
• 2: Enabled, but only begins
transmitting if an LLDP frame is
received.
LOCAL_DIAL_AREA_CODE 0 Specifies if user must dial area code
for calls within same area code
regions.
Value operation:
• 0: User does not need to dial area
code.
• 1: User need to dial area code.
When enabled, the area code
parameter (PHNLAC) should also
be configured.
Note:
This parameter is supported
when the phone is failed over.
Table continues…
List of configuration parameters
January 2020 Installing and Administering Avaya 9601/9608/9611G/9621G/9641G/9641GS IP
Deskphones SIP 206
Comments on this document? infodev@avaya.com
To Next Page
Loading...
