Avaya 9600 Series - Turning a Normal Call Into a Conference; Adding Another Party Using Hold

• Failback Policy: Specifies the fail back policy.
The two modes are as follows:
- Auto: Active controller automatically recovers after failback.
- Administration: Active controller uses failback policy defined by the administrator.
• Proxy Policy: Specifies whether the settings of SIP proxy servers are taken from the
46xxsettings.txt file or can be edited by the user.
The two modes are as follows:
- Auto: The settings are taken from the 46xxsettings.txt file. The user can only
view the settings.
- Manual: The user can edit, delete, or create new server properties.
• Avaya Config Server: Specifies the IP address of Avaya configuration server, only if
PPM is not on the same server as the SIP Proxy server.
• User ID: Specifies the user ID of the currently logged in user.
• Host to Ping: Checks the host server for response using IP address or DNS.
The SIP call settings entered through the Administration menu take precedence over other
sources for this data, for example, 46xxsettings.txt file or PPM. The only way to
override these settings is to remove the settings or use the CLEAR option from the
Administration menu on phone.
3. Select SIP Proxy Server to change SIP proxy server settings.
The phone displays a list of currently configured servers.
Caution:
Do not configure proxy settings manually while a user is logged on to the phone.
4. Do one of the following:
• To add a new server, select New, enter the following values and select Save.
- SIP Proxy Server: Specifies the IP address or DNS for Session Manager
deployments. The corresponding parameters are SIP_CONTROLLER_LIST for IPv4
and SIP_CONTROLLER_LIST2 for IPv6 or dual mode.
- Transport Type: Specifies the type of transport. The available options are TCP, UDP,
or TLS. The corresponding parameter is SIPSIGNAL.
- SIP Port: Specifies the SIP port. If no value is entered, default of 5060 for UDP/TCP
or 5061 for TLS is used. If Transport Type is UDP/ TCP, SIP_PORT_ SECURE is
used.
• To edit a SIP proxy server settings, select the server from the list of configured servers
and edit fields such as, SIP Proxy Server, Transport Type, or SIP Port. Select Save.
• To delete a SIP proxy server, select Delete.
Configuring SIP settings
January 2020 Installing and Administering Avaya 9601/9608/9611G/9621G/9641G/9641GS IP
Deskphones SIP 59
Comments on this document? infodev@avaya.com