Avaya 9600 Series - Changing Your Voicemail Code; Switching Voicemail On;Off

Changing Your Voicemail Code
Procedure
1. Press the MESSAGE button.
• Depending on how your system is configured, you may be required to enter your
voicemail password and then press Done.
2. The Visual Voice menu is displayed.
3. Use the cursor keys to select Password.
4. Enter your current password and press Save.
5. Enter the new password that you want to use. When the desired password is complete,
press Save.
• Your system administrator can set rules for the required length of the code and to block
the use of obvious codes (1234, 1111). You cannot save a new code until those
requirements have been meet. Contact your system administrator for details of your
system’s settings if necessary.
Related links
Voicemail on page 103
Switching Voicemail On/Off
You can control whether the telephone system uses voicemail to answer your unanswered calls.
This does not switch off your mailbox which you can still access to play existing messages and
use other functions.
Procedure
1. Press the
MESSAGE button.
• Depending on how your system is configured, you may be required to enter your
voicemail password and then press Done.
2. The Visual Voice menu is displayed.
3. Use the up and down cursor keys to highlight Voicemail.
4. Press the Change to switch between On or Off.
5. Press Save to save the change.
Related links
Voicemail on page 103
Voicemail
November 2021 Using 9600 Series Phones on Avaya IP Office 108
Comments on this document? infodev@avaya.com