• To assign a function to the highlighted button press Replace.
- Select the required function from the list and press Select.
- Depending on the function, you may need to enter some information such as a target
extension number.
• The button is given a default label based on the function assigned. To change the label,
press More and then select Label. Use the keyboard to enter the text you want to
display for the button label. Note that the label is only shown while editing the label and
after you exit the administration menu.
6. When completed, press Back.
Related links
Programmable Feature Buttons on page 150
Programmable Button Features
There are a wide range of features that can be assigned to the buttons. This guide only lists those
that you can assign to a button using the self-administer menu. Features that can only be
assigned by your system administrator will be explained by them.
Some actions are not supported on all phones. However, they may be set for users who hot desk
between different types of phone.
Related links
Programmable Feature Buttons on page 150
Abbreviated Dial Button on page 152
Absence Text Button on page 152
Account Code Button on page 152
Auto Answer Button on page 152
Call Forward All Button on page 153
Call Park Button on page 153
Call Park to Other Button on page 153
Call Pickup Button on page 154
Call Pickup Any Button on page 154
Conf Meet Me Button on page 154
Drop Button on page 154
Flash Hook Button on page 154
Group Button on page 155
Page Button on page 155
Park and Page Button on page 155
Ringer Off Button on page 155
Self-Administer Button on page 156
Programmable Button Features
November 2021 Using 9600 Series Phones on Avaya IP Office 151
Comments on this document? infodev@avaya.com
To Next Page
Loading...
Need help?
General
