Chapter 14: Follow Me
'Follow me to' is used to redirect your calls to another extension that you are temporarily sharing.
The calls are presented with your user name so that they can be distinguished from calls for the
extension's normal user. This allows you to share another person's phone without logging them off
their phone.
All calls are redirected and the calls are still subject to all your user settings as if they were ringing at
your phone.
• 'Follow me to' is the used to enable 'follow me' from your own phone.
• 'Follow me here' is used to enable 'follow me' at the extension to which you want your calls
redirected.
Related links
Follow Me To (Features Menu) on page 76
Follow Me (Status Menu) on page 77
Follow Me Here (Features Menu) on page 77
Follow Me Here (Status Menu) on page 78
Follow Me Short Codes on page 78
Follow Me To (Features Menu)
Using the phone’s Features menu, you can set and clear follow me to settings.
• Your system administrator can configure whether you can access this menu.
Procedure
1. Press the Features soft key if shown.
• To do this during a call, press the
PHONE key and then press Features.
2. Use the cursor keys to select Forward.
3. Use the cursor keys to select Follow Me To.
4. Dial the number of another user. When it matches a user, their name is displayed.
Alternatively, use the Dir soft key to select a user from the directory.
November 2021 Using 9600 Series Phones on Avaya IP Office 76
Comments on this document? infodev@avaya.com
To Next Page
Loading...
