Avaya 9600 Series - Pairing a Bluetooth Headset; Selecting a Paired Headset

To Next Page

To Previous Page

Pairing a Bluetooth Headset

Before using the following process, put the headset into pairing mode using the headset

manufacturer's instructions

Procedure

1. Press the

button. On 9621/9641 phones, select Settings.

2. Use the cursor keys to select Options & Settings.

3. Use the cursor keys to select Bluetooth.

4. Click on Scan.

5. The phone scans for available Bluetooth headset devices. When the headset is detected,

its name appears in the list of paired devices.

6. Select the required headset and click Pair.

• Once paired, you can highlight the device and click Forget if you want to remove the

pairing.

Related links

Using Bluetooth Headsets on page 116

Selecting a Paired Headset

The phone can support up to 10 paired headsets. However, only one can be currently connected

at any time. This process allows you to select which of the paired headsets to connect.

If the selected headset has been out of range, it should reconnected automatically. However, this

process can also be used to manually re-establish the connection if required.

Procedure

1. Press the button. On 9621/9641 phones, select Settings.

2. Use the cursor keys to select Options & Settings.

3. Use the cursor keys to select Bluetooth.

4. Highlight the required headset. Click Connect. That headset becomes the currently

connected device.

5. To disconnect a device without removing its pairing, highlight it and click Disconct.

6. Highlighting a device and clicking Forget removes the devices pairing. Only do this if you

don't expect to use that device again. If done by mistake, the device needs to be paired

again.

Other manuals for Avaya 9600 Series