Procedure
1. Press the Features soft key if shown.
• To do this during a call, press the
PHONE key and then press Features.
2. Use cursor keys to select Call Settings.
3. Use the up and down cursor keys to highlight Enbloc Dial.
4. Press the Change button to select On or Off.
5. Press Save.
Related links
En-Bloc Dialing on page 36
Withholding Your Number
You can select to withhold your number on external calls.
• Your system administrator can configure whether you can access this menu.
Note:
• Use of this option depends on the external line provider. In some cases, attempting to
use this feature can causes calls to fail. If this occurs, the feature should be switched off.
Procedure
1. Press the Features soft key if shown.
• To do this during a call, press the
PHONE key and then press Features.
2. Use cursor keys to select Call Settings.
3. Use the up and down cursor keys to highlight Withhold Number.
4. Press the Change button to select On or Off.
5. Press Save.
Related links
Making Calls on page 31
Adjusting the Call Volume
Whilst talking, you can adjust the volume of the incoming call. The volume is adjusted separately
for whichever device is in use (handset, headset or speaker).
Withholding Your Number
November 2021 Using 9600 Series Phones on Avaya IP Office 37
Comments on this document? infodev@avaya.com
To Next Page
Loading...
