Chapter 7: Redialling
The phone's redial operation works in one of the following modes:
• Open Call Log – In this mode, pressing Redial displays a list of your most recent outgoing
calls. You can select the call that you want to redial from the list.
• Last Dialled – In this mode, pressing Redial immediately repeats your most recent outgoing
call.
In either case, the redial function uses the outgoing call records in your personal call log. If you
delete the records in your call log (see Deleting the Whole Call Log on page 100), redial will not
work until new outgoing call records exist.
Related links
Redialling in List Mode on page 34
Redialling a Previous Number on page 34
Selecting Your Redial Mode on page 46
Redialling in List Mode
This redial method is used when your phone's redial mode is set to Open Call Log.
Procedure
1. Access the redial list:
a. Press Redial. The list of outgoing calls is displayed.
b. Use the up and down cursor keys to scroll through the 10 most recent outgoing calls.
2. Press Call to call the number displayed in the call record.
3. Continue in the same way as for a normal dialed call.
Related links
Redialling a Previous Number on page 34
Redialling on page 45
November 2021 Using 9600 Series Phones on Avaya IP Office 45
Comments on this document? infodev@avaya.com
To Next Page
Loading...
