Avaya 9600 Series - User Button

To Next Page

To Previous Page

Related links

Programmable Button Features on page 151

User Button

This type of button monitors the status of another user. The button lamp indicates the status of the

user.

• Off = Available – Pressing the button makes a call to the user. In addition to calling the user,

you can use the user button to transfer calls to the user or to start a conference with the user.

• Slow Flash = Ringing – Pressing the button display options to pickup the call.

• Fast Flash = On a Call – Pressing the button display the following options:

- Call – Call the user.

- Message – Cause a single burst of ringing on the user's phone. They also see the

message "Please Call" followed by your extension number.

- Voicemail – Call the user's voicemail mailbox to leave a message.

- CallBack – Set an automatic callback on the user. The callback occurs when the user

ends their current call.

The following options are only available if configured for you by your system administrator:

- Drop – Disconnect the user's current call.

- Acquire – Seize the user's current call.

- Intrude – Join the user's current call, turning it into a conference call.

- Listen – Start silent monitoring of the user's call.

Other manuals for Avaya 9600 Series