Related links
Entering Text Characters on page 180
Entering Characters for Other Functions
• Select a character by re-pressing the indicated button until the required character is
displayed. Then:
- Pressing another button enters that character and moves to entering the next character
from the newly selected button.
- Pausing for more than a second after pressing a button also enters the current character
and moves to entering the next character.
• You can select the text entry mode. The current mode is shown by the soft-key label as
below. Pressing the soft-key switches text entry to the next mode:
- abc – Lower-case.
- ABC – Upper-case.
- Abc – Capitalized.
- 123 – Number only mode.
- Hex – Hexadecimal only mode.
• Use the left and right cursor keys to move the cursor.
• Press Bksp to delete the character before the cursor.
Related links
Entering Text Characters on page 180
Entering Characters for Other Functions
November 2021 Using 9600 Series Phones on Avaya IP Office 181
Comments on this document? infodev@avaya.com
To Next Page
Loading...
