Unlocking Your Phone
The message PHONE LOCKED indicates that the phone has been locked. While locked, the
phone can only be used to make internal calls to other extensions and none of the phone and user
menus can be accessed.
Procedure
1. Press the Unlock soft key.
2. If you have a login code, enter that code to unlock the phone. If you do not know your login
code, contact your system administrator.
3. Press the Done soft key.
Related links
Logging In/Out on page 122
Auto Lock
Rather than logging out, you can lock your phone. You can either lock your phone manually using
the steps below or have it automatically locked after a period of phone inactivity.
When your phone is locked:
• It can only be used to make internal and emergency calls.
• You cannot access the phone menus for your user settings.
• To unlock your phone, click Unlock. If you have a login code set, you need that code to
unlock the phone. If you do not know your login code, contact your system administrator.
•
Warning:
If you have a login code set, you need that code to unlock the phone. If you do not know
your login code, contact your system administrator before using any lock features.
• Your system administrator can configure whether you can access this menu.
Procedure
1. Press the Features soft key if shown.
• To do this during a call, press the PHONE key and then press Features.
2. Use the cursor keys to select Phone User.
3. Use the cursor keys to select Phone Screen Settings.
4. Use the up and down cursor keys to highlight Auto Lock (minutes).
5. Press the Change soft key to change the setting or use the left or right cursor keys.
• Disabled - Do not use the inactivity timer.
Unlocking Your Phone
November 2021 Using 9600 Series Phones on Avaya IP Office 127
Comments on this document? infodev@avaya.com
To Next Page
Loading...
