Self-Administer Button
A button configured for this action can be used to access the Self Administer menu.
Related links
Programmable Button Features on page 151
Send All Calls Button
A button configured with this action can be used to switch 'do not disturb' on or off. When 'do not
disturb' is on, the button's red lamp is lit or a red warning icon is displayed. Pressing the button
again turns 'do not disturb' off.
Related links
Programmable Button Features on page 151
Suppress Digits Button
Masks the display of digits as you dial them on the phone. Dialed digits are replaced with an s
character. The button is used to switch the suppression on/off. When 'suppress digits' has been
set, the button's red lamp is lit. Pressing the button again cancels the suppression.
• If en-bloc dialing is active you still see the digits as you dial them. When you make the call
the digits are suppressed.
• When the option to suppress digits is used, the call is not recorded in the call log.
Related links
Programmable Button Features on page 151
Twinning Button
A button configured for this feature allows you to control your phone's mobile twinning operation.
Twinning on page 80
This is only usable if your system administrator has configured you for mobile twinning.
• If pressed when the phone is idle, the phone displays the mobile twinning menu. You can use
the menu to switch mobile twinning on/off and to setting the twinned destination.
• If pressed while a twinned call is connected to the twinned destination, the system attempts
to reclaim the call.
• If pressed while connected to a call on the phone, the system attempts to transfer the call to
the twinned destination. You do not need twinning switched on to use this feature.
Programmable Feature Buttons
November 2021 Using 9600 Series Phones on Avaya IP Office 156
Comments on this document? infodev@avaya.com
To Next Page
Loading...
