Avaya J129 - Page 303

Parameter name Default
value
Description
SIPREGPROXYPOLICY Simultaneo
us
Specifies if the phone attempts to
maintain one or multiple
simultaneous registrations.
Value operation:
• Alternate: Only a single
registration is attempted and
maintained.
• Simultaneous: Simultaneous
registrations is attempted and
maintained with all available
controllers.
SKILLSCREENTIME 5 Specifies the duration, in seconds,
that the Skills screen is displayed.
Valid values are 0 through 60. The
default value is 5.
A value of 0 means that the Skills
screen in not removed
automatically when the agent logs
in.
SLMCAP 0 Specifies if the SLA Monitor agent
is enabled for packet capture.
Value operation:
• 0: Disabled (default)
• 1: Enabled and payloads are
removed from RTP packets
• 2: Enabled and payloads are
included in RTP packets
• 3: Controlled from admin menu -
Allows you to enable or disable of
RTP packets capture using local
admin procedures.
SLMCTRL 0 Specifies whether the SLA Monitor
agent is enabled for phone control.
Value operation:
• 0: Disabled
• 1: Enabled
• 2: Controlled from admin menu.
Table continues…
List of configuration parameters
July 2019 Installing and Administering Avaya J100 Series IP Phones 303
Comments on this document? infodev@avaya.com