26
To switch from Host mode to Remote mode, move the Host cursor to the top-right corner of the
targeted window and then click the Enter remote mode icon (or double-click your mouse's left
button any area within that window).
When entering Remote mode (“Surfer” feature is automatically active), your Sequoia 4K60
automatically transfers its keyboard and mouse control to the selected computer. Use the keyboard
and mouse to control that computer as you regularly would.
To switch back to Host mode, use the keyboard “Pause/Break” hotkey, or double-click the mouse
scroll button. The Sequoia 4K60 will return to Host mode and the Host cursor will reappear.
3.1 Host Mode
In Host mode, users can monitor images of the connected computers and adjust the four windows using
the provided selections and menu. Basic operations allowed in Host mode are mentioned below.
3.1.1 Pop-up Selections
Upon moving the Host cursor to the top-right corner of a window, the following pop-up selections will
appear:
Swap: enable a window to switch its position with the other window (this icon only appears in
quad-view mode)
Enter remote mode: enter Remote operation mode and control the computer
corresponding to the window (this icon only appears in quad-view mode)
Fullscreen: set the selected window to fullscreen (this icon only appears in quad-view mode)
Select HDMI IN 1 input source (this icon only appears in fullscreen mode)
Select HDMI IN 2 input source (this icon only appears in fullscreen mode)
Select HDMI IN 3 input source (this icon only appears in fullscreen mode)
Select HDMI IN 4 input source (this icon only appears in fullscreen mode)
Switch to default quad-view layout (this icon only appears in fullscreen mode for the first HDMI
OUT port)
Restore: return from a fullscreen view to previous layout (this icon only appears in
fullscreen for HDMI OUT port 1 – 4 in Workstation (default) display mode )
HDMI audio: embedded audio output in HDMI signal is enabled (this icon only appears in
fullscreen mode)
HDMI audio: embedded audio output in HDMI signal is disabled (this icon only appears in
fullscreen mode)
When Sequoia 4K60 detects:
1. A particular computer’s USB port is not connected, the Enter remote mode pop-up icon on the
corresponding window will be disabled.
2. An input source was lost; the HDMI IN # icon in the pop-up selections will be disabled.
To Next Page
Loading...