31
Click icon to switch its position and size with the other window. Upon clicking icon, the Host
cursor will change to , then move cursor to the target window and click to swap.
Click icon or double-click the mouse left button on a selected window to enter the Remote
mode.
Click icon to set the selected window to fullscreen.
Click (input 1) – (input 4) icons to switch the input source when in fullscreen window.
Click icon to load default quad-view layout (this icon only appears when in fullscreen mode).
Click icon for returning from a fullscreen view to previous layout (this icon only appears when in
fullscreen mode).
Click icon (the audio currently in off state) to turn on the HDMI embedded audio. Click icon
(the audio currently is playing) to turn off the HDMI embedded audio.
1. The pop-up selections are only available for HDMI OUT 1 when the source is
in fullscreen mode.
2. When the INPUT # icon is greyed out, that means its source is currently displaying on the monitor.
3. When the icon is greyed out, that means the USB Type-B port of Sequoia 4K60 is not connected to a
computer's USB port.
Remote Mode
When Sequoia 4K60 enters Remote mode, the Host cursor disappears, and the “Surfer” feature is
enabled. The window’s border will turn yellow, this signifies that your Sequoia 4K60 is now in Remote
mode with “Surfer” feature.
For computers hosting Linux, or Android, or Embedded Operating System, you will need to switch off
“Surfer” feature by using keyboard “Ctrl + Alt + Shift + F8” hotkey or pressing side-key of the mouse
(if applicable) in order to control that computer. The window’s border will turn red, this signifies that
your Sequoia 4K60 is now in Remote mode without “Surfer” feature. Your keyboard and mouse
control will stay within that window and won’t be able to move across the border.
Entering Remote mode, your Sequoia 4K60 transfers keyboard and mouse control to the selected
computer system.
You can then control the computer as you regularly would within the window on the display.
Use keyboard “Pause/Break” hotkey or double-click the mouse scroll button connected to Sequoia
4K60 to return keyboard and mouse control to Host mode. The Host cursor will reappear.
Your Sequoia 4K60 can only enter Remote mode to take control of a computer when the correct USB
Type-B port (marked 1 – 4) on your Sequoia 4K60's rear panel is properly connected to the USB
Type-A port of that computer (using a standard USB A/B cable). In addition, only windows
corresponding to computer systems (as opposed to pure video systems) can be accessed through
Remote mode.
In summary:
When utilizing the “Surfer” feature, moving away from quad-view to the neighboring fullscreen monitor
the mouse will remain in the respective Remote or Host modes.
To Next Page
Loading...