Four HDMI Type-A connectors for multiview display or routing HDMI IN 1 – 4
source signal in single-view fullscreen display on the connected monitors (HDMI to
DVI adapters may be needed).
Note: Transmission of audio signal is not included when using DVI to HDMI
adapter.
Four USB Type-A connectors for connecting to mouse/keyboard/touch screens
(multiple USB devices can be connected with a USB hub) and controlling the
connected four computer systems (Remote mode) and the Sequoia 4K60 Host
mode operation.
Note:
1. The Sequoia 4K60 can provide a total maximum current of 500mA for both of
USB Type-A port 1 and port 2; and another total maximum current of 500mA for
both of USB Type-A port 3 and port 4.
2. Please be advised when using wireless mouse/keyboard, signal interference
may occur with other 2.4 GHz devices in close proximity, leading to slow mouse
movement or other issues. The Sequoia 4K60 has multiple USB ports closely
packed together, and with each USB port capable of supporting one user
connection, it would be best to use short USB extension cables to physically
separate the wireless USB receiver dongles, or use USB hubs for direct wired
connections to mouse/keyboard/touch screens to avoid any interference.
3. If you plan to use a USB hub to support more USB devices i.e. keyboard, mouse
and touch screen, it is strongly recommended to use a powered USB Hub to
prevent any drops in performance. If a powered USB HUB is not available, you
may use an unpowered USB 2.0 Hub instead.
4. The following items can be commonly used for USB extension to avoid any
interference:
A short USB extension cable can physically
separate multiple wireless USB receiver
dongles concurrently connected to the
Sequoia 4K60, preventing any signal
interference.
To Next Page
Loading...