Basler GigE SERIES User Manual

AW00089317000 Image Acquisition Control
Basler ace GigE 153
When the camera's acquisition mode is set to single frame, the maximum possible
acquisition frame rate for a given AOI cannot be achieved. This is true because
the camera performs a complete internal setup cycle for each single frame and
because it cannot be operated with "overlapped" exposure.
To achieve the maximum possible acquisition frame rate, set the camera for the
continuous acquisition mode and use "overlapped" exposure.
For more information about overlapped exposure, see Section 7.11 on page 148.

Basler GigE SERIES Specifications

General

Interface	GigE
Lens Mount	C-Mount, CS-Mount
Sensor	CMOS
Mount	C-mount, CS-mount
Power Supply	Power over Ethernet (PoE)
Dimensions	Varies by model
Weight	Varies by model
Operating Temperature	Varies by model