Basler GigE SERIES User Manual

Camera Functional Description AW00089317000
54 Basler ace GigE
4.4 Cameras With Switchable Shutter
Mode
Valid for
acA1300-60 and acA1600-60
For these cameras, two shutter modes are available.
The cameras can be operated in the global shutter or rolling shutter mode.
By default, the shutter mode is set to global shutter mode.
Depending on your requirements you can set the camera to the desired shutter mode.
Valid for
acA1920-25, acA2500-14
For these cameras, two rolling shutter modes are available.
The cameras can be operated in the electronic rolling shutter (ERS) or in the global reset
release shutter (GRR) mode.
By default, the shutter mode is set to ERS mode.
Depending on your requirements you can set the camera to the desired shutter mode.
For information about
 the sensor architecture and global shutter mode, see Section 4.2 on page 50
 the sensor architecture and rolling shutter mode, see Section 4.3 on page 52
 electronic shutter operation in detail, see Section 7.7 on page 118
 setting the shutter mode, see page 124

Basler GigE SERIES Specifications

General

Interface	GigE
Lens Mount	C-Mount, CS-Mount
Sensor	CMOS
Mount	C-mount, CS-mount
Power Supply	Power over Ethernet (PoE)
Dimensions	Varies by model
Weight	Varies by model
Operating Temperature	Varies by model